Industrial doors in Manchester
Greater Manchester mixes some of the oldest industrial estates in the country with large new logistics sheds along the M60, M62 and M56. That means a lot of work replacing worn doors on older units as well as full loading bay packages on new ones.
Where the work is
- Trafford Park
- One of the largest industrial estates in Europe, with food, manufacturing and distribution side by side. Older brick and steel units often need shutters replaced and openings re-steeled; food sites use hygienic high-speed doors.
- Port Salford and the ship canal
- Newer multimodal and distribution sites with high, wide openings and busy docks, where insulated sectional doors and levellers are the main kit.
- Airport and the M56
- Distribution and air freight units around the airport run long hours. Fast internal doors and night-time servicing are common.
- Oldham, Rochdale, Bury and Bolton
- Mill-town estates with older stock and mixed tenants. Roller shutter repairs, motor upgrades and security shutters make up much of the work.
Guide prices for Manchester
National published ranges, supplied and fitted, before VAT. Local labour, access and working hours move them within or slightly above these ranges.
| Ref | Door | Guide price |
|---|---|---|
| D1 | Insulated roller shutter, 4 x 5 m | £4,300 to £8,200 |
| D2 | Insulated sectional dock door, 3 x 3.5 m | £2,400 to £4,100 |
| D3 | Fabric high-speed door, 3 x 3.5 m | £7,600 to £15,300 |
| D4 | Fire shutter, 60 minute, 3 x 3 m | £3,000 to £5,600 |
| D5 | Hydraulic leveller and shelter, per bay | £8,300 to £16,000 |
Planning and consents
Each of the ten Greater Manchester districts handles its own planning, including Manchester, Trafford and Salford councils. Like-for-like door replacement normally needs no permission. New openings in older brick buildings may need a structural engineer for the lintel as well as consent, and listed or conservation-area mills need extra care.
Weather, access and working hours
The North West is wet, and units on the Pennine fringe get strong winds. Doors on exposed sites need the right wind class and good seals, and bottom seals and drainage at the threshold are worth checking on every service.
Industrial doors in Manchester: questions
Can a new door go into an old mill or brick unit?
Do roller shutters rust in Manchester's weather?
Is servicing available across Greater Manchester?
Keep reading
- Servicing and maintenance
Planned visits and contracts.
- Industrial door repairs
Faults and repair prices.
- Choosing warehouse doors
Every door type compared.
- Industrial door installation
All door types, prices and the opening picker.
Get door quotes in Manchester
Three short steps. The site postcode, the type of door and the rough opening size are enough to start. A specialist confirms the detail on a site survey.
Your request stays with us until you approve the independent industrial door specialist we put forward for your site.
Received. Here is what happens next.
- We look for an independent industrial door specialist who covers your area and fits doors like yours, then email or phone you with their name.
- Nothing goes to them until you say yes.
- If you agree, they measure up on site and send a written price. No newsletters and no sales calls from us.